TM 9-2320-365-20-3
(10) Remove self-locking nut (14) and washer (15) from
voltage regulator (16).
(11) Position terminal lug TL110 (17), washer (15), and self-
locking nut (14) on voltage regulator (16).
(12) Tighten self-locking nut (14) to 20 lb-in. (2.5 N m).
(13) Position dust boot (18) on terminal lug TL110 (17).
(14) Remove self-locking nut (19) and washer (20) from
voltage regulator (16).
(15) Position terminal lug TL35 (21), washer (20), and self-
locking nut (19) on voltage regulator (16).
(16) Tighten self-locking nut (19) to 25 lb-in. (3 N m).
(17) Position dust boot (22) on terminal lug TL35 (21).
(18) Remove self-locking nut (23), washer (24), and two
washers (25) from alternator (3).
(19) Position two washers (25) terminal lugs TL6 (26) and
TL2 (27), washer (24), and self-locking nut (23) on
alternator (3).
(20) Tighten self-locking nut (23) to 80 lb-in. (9 N m).
(21) Position dust boot (28) on terminal lug TL2 (27).
(22) Position clamp (29), washer (30), and screw (31) on
alternator (3).
(23) Tighten screw (31) to 80 lb-in. (9 N m).
Change 1
7-7
