TM 9-2320-365-20-3
7-32. COMPOSITE TAILLIGHT ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Wrench Set, Socket (Item 49, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Lockwasher (2) (Item 92, Appendix G)
Packing, Preformed (Item 170, Appendix G)
Nut, Self-Locking (Item 116, Appendix G)
NOTE
• Tag wires and connection points prior to
disconnecting.
• Remove plastic cable ties as required.
• Right side connectors are P61, P62, P63, P64,
22-460, 24, 23, 21, and TL 21.
a. Removal.
NOTE
Left and right composite taillights are
removed the same way. Left side shown.
(1) Remove self-locking nut (1), screw (2), and clamp (3)
from taillight carrier (4). Discard self-locking nut.
(2) Disconnect connectors P74, P76, P77, P78 (5) from
composite taillight connectors 22-461, 24, 23, 21 (6).
(3) Remove two screws (7), lockwashers (8), terminal lugs
TL18 and TL16 (9), and composite taillight assembly (10)
from taillight carrier (4). Discard lockwashers.
Change 1
7-149
