TM 9-2320-365-20-3
7-33. COMPOSITE FRONT LIGHT ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Lockwasher (2) (Item 92, Appendix G)
Packing, Preformed (Item 170, Appendix G)
a. Removal.
NOTE
Both composite front light assemblies are
removed the same way. Left side shown.
Tag wires and connection points prior to
disconnecting.
Connectors for right side are P8, P9 and
P10.
(1) Disconnect connectors P22, P23, and P24 (1) from
composite front light assembly (2).
(2) Remove two screws (3), lockwashers (4), three terminal
lugs (5), and composite front light assembly (2) from
front bumper (6). Discard lockwashers.
7-153
