TM 9-2320-365-20-3
(6) Position retainer (11), lens (12), and bezel (13) on cover
(14) with two screws (15).
(7) Position preformed packing (16) and cover (14) on
housing (17) with six screws (18).
(8) Tighten two screws (15) and six screws (18) to 20-25 lb-
in. (1 N·m).
d. Composite Taillight Assembly Installation.
NOTE
• Left and right composite taillights are installed
the same way. Left side shown.
• Install plastic cable ties as required.
(1) Position two lockwashers (1), screws (2), terminal lugs
TL18 and TL16 (3), and composite taillight assembly (4)
on taillight carrier (5).
(2) Tighten two screws (2) to 35-42 lb-ft (48-57 N·m).
(3) Connect connectors P74, P76, P77, P78 (6) to
composite taillight connectors 22-461, 24, 23, 21 (7).
(4) Install clamp (8) on taillight carrier (5) with screw (9) and
self-locking nut (10).
Change 1
7-151
