TM 9-2320-365-20-3
7-55. M1081 CAB CLEARANCE AND MARKER LIGHTS LOWER CABLE ASSEMBLY
REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
PDP cover removed (para 16-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B)
Material/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Lockwasher (2) (Item 81, Appendix G)
a. Removal.
(1) Remove three screws (1) and washers (2) from PDP (3).
(2) Remove three screws (4) from PDP (3).
(3) Lift PDP (3) outward to gain access.
NOTE
Tag wires and connection points prior to
disconnecting.
(4) Remove two nuts (5), lockwashers (6), washers (7), and
cover (8) from terminal board TB1 (9).
Discard
lockwashers.
(5) Disconnect terminal lug TL74 (10) from terminal board
TB1 (9) position 3.
(6) Disconnect terminal lug TL86 (11) from terminal board
TB2 (12) position 4.
7-226
