TM 9-2320-365-20-3
(7) Remove M1081 cab clearance and marker lights upper
cable assembly (15) from cab roof (7).
b. Installation.
NOTE
Transfer mechanics wire to new M1081 cab
clearance and marker lights upper cable
assembly.
(1) Position M1081 cab clearance and marker lights upper
cable assembly (1) in cab roof (2).
NOTE
All M1081 cab clearance and marker lights are
installed the same way. Upper left cab marker
light shown.
Refer to Table 7-3. M1081 Cab Clearance and
Marker Lights Connectors for combinations of
terminal lugs and connectors on each light.
(2) Install gasket (3) on marker light (4).
(3) Connect connector (5) to marker light connector 489 (6).
(4) Install lockwasher (6.1) and terminal lug (7) on marker
light (4) with lockwasher (8) and nut (9).
Change 1
7-231