TM 9-2320-365-20-3
(7) Disconnect connector P3 (13) from connector J3 (14).
(8) Remove two screws (15), washers (16), clamps (17),
and M1081 cab clearance and marker lights lower cable
assembly (18) from cab (19).
(9) Remove two clamps (17) from M1081 cab clearance and
marker lights cable assembly (18).
b. Installation.
(1) Install two clamps (1) on M1081 cab clearance and
marker lights cable assembly (2).
(2) Position M1081 cab clearance and marker lights lower
cable assembly (2) in cab (3) with two clamps (1),
washers (4), and screws (5).
(3) Tighten two screws (5) to 29-35 lb-in. (3-4 N·m).
(4) Connect connector P3 (6) to connector J3 (7).
(5) Connect terminal lug TL86 (8) to terminal board TB2 (9)
position 4.
(6) Connect terminal lug TL74 (10) to terminal board TB1
(11) position 3.
(7) Install cover (12) on terminal board TB1 (11) with two
washers (13), lockwashers (14), and nuts (15).
7-227
