TM 9-2320-365-20-3
(18) Install terminal lug TL6 (29) in dust boot (30).
CAUTION
Insulation washer must be installed with flat
side up. Failure to comply may result in
damage to equipment.
(19) Position terminal lugs TL2 (31) and TL6 (29) on alter-
nator (32) with insulation washer (33), washer (34), and
self-locking nut (35).
(20) Tighten self-locking nut (35) to 40 lb-in. (5 N·m).
(21) Position dust boot (30) on terminal lugs TL6 (29) and
TL2 (31).
(22) Position terminal lugs TL8 (36) and TL5 (37) on alter-
nator (32) with washer (38), lockwasher (39), and screw
(40).
(23) Tighten screw (40) to 40 lb-in. (5 N·m).
(24) Connect connector P36 (41) to water temperature switch
connector (42).
(25) Connect connector clamp (43) on connector P36 (41).
(26) Connect connector P37 (44) to coolant temperature light
switch connector (45).
(27) Connect connector clamp (46) on connector P37 (44).
7-287