TM 9-2320-365-20-3
7-72. ENGINE CONTROL CABLE ASSEMBLY REPLACEMENT (CONT)
(28) Connect connector P42 (47) to ether sensor connector
(48).
(29) Connect connector clamp (49) on connector P42 (47).
(30) Position terminal lug TL28 (50) on fuel shutoff solenoid
(51) with lockwasher (52) and nut (53).
(31) Position terminal lugs TL66 (54) and TL29 (55) on fuel
shutoff solenoid (51) with lockwasher (56) and nut (57).
(31.1) Tighten nuts (53 and 57) to 23-27 lb-in. (3 N·m).
(32) Connect connector P32 (58) to oil pressure transducer
(59).
(33) Connect connector P34 (60) to oil pressure light switch
connector (61).
(34) Connect connector clamp (62) on connector P34 (60).
(35) Connect connector P33 (63) to fuel/water separator
connector (64).
(36) Connect connector clamp (65) on connector P33 (63).
7-288
Change 1
