TM 9-2320-365-20-3
NOTE
Perform steps (4) through (6) on vehicles
equipped with auxiliary panel.
(4) Push auxiliary panel cable assembly (6) back through
forward hole in dashboard (2).
(5) Connect connector P108 (7) to connector J108 (8).
(6) Connect connector P210 (9) to connector J210 (10).
WARNING
Ensure WTEC III cab transmission harness
does not interfere with throttle linkage.
Failure to comply may result in injury to
personnel.
NOTE
Step (7) requires the aid of an assistant.
(7) Install gasket (11) and connector J119 (12) on cab (13)
with four screws (14), lockwashers (15), and nuts (16).
7-379
