TM 9-2320-365-20-3
7-88. LOW PRESSURE TRANSMITTER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Drill Set, Twist (Item 6, Appendix C)
Materials/Parts
Adhesive (Item 9, Appendix D)
Antiseize Compound (Item 14, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Lockwasher (2) (Item 90, Appendix G)
a. Removal.
NOTE
• Perform step (1) on vehicle serial number 7448
and higher and vehicle serial numbers 0001
through 7447 that have previously had front
lights cable assembly replaced.
• Tag wires and connection points prior to
removal.
(1) Remove adhesive and boot (1) from low pressure
transmitter (2).
(2) Remove adhesive, two nuts (3), lockwashers (4), and
terminal lugs TL201 (5) and TL202 (6) from low pressure
transmitter (2). Discard lockwashers.
(3) Remove low pressure transmitter (2) from reducer
bushing (7).
Change 1
7-381
