TM 9-2320-365-20-3
(4) Remove two screws (7) from mounting bracket (8).
(5) Remove four screws (9), mounting bracket (8), two
captive nuts (10), and WTEC II TEPSS (2) from
instrument panel assembly (11).
b. Installation.
(1) Cut two pieces of fastener tape (hook side) (1) to 1.5 X
0.5 in. (3.8 X 1.3 cm).
(2) Install two fastener tapes (1) on light filter assembly (2)
at locations shown.
8-3
