TM 9-2320-365-20-3
8-9. TRANSMISSION OIL FILTER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Container (60 qt (57 L) capacity)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57,
Appendix C)
Materials/Parts
Oil, Lubricating, OE/HDO 30 (Item 46, Appendix D)
Kit, Filter (Item 55, Appendix G)
Screw, Cap (4) (Item 237.1, Appendix G)
WARNING
• Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
• Ensure exhaust system is cool before
performing maintenance. Failure to comply
may result in injury to personnel.
CAUTION
There are two transmission oil filters. Do not
replace one transmission oil filter without
replacing the other. Failure to comply may
result in damage to equipment.
a. Removal.
(1) Position container under transmission control valve
module (1).
(2) Remove drain plug (2) from transmission control valve
module (1) and drain oil.
8-32
Change 1
