TM 9-2320-365-20-3
11-4. FRONT BRAKE PLUNGER ASSEMBLY REPLACEMENT/REPAIR (CONT)
(2) Remove two adjusting pawl assemblies (3) and
lockwashers (4) from plunger housing (2). Discard
lockwashers.
NOTE
Note location of adjusting plunger assemblies
prior to removal.
(3) Remove two adjusting plunger assemblies (5) from
plunger housing (2).
(4) Remove two guide screws (6) and lockwashers (7) from
plunger housing (8). Discard lockwashers.
(5) Remove two anchor plungers (9) from plunger housing
(8).
b. Disassembly.
(1) Remove adjusting sleeve (1) from adjusting plunger (2).
(2) Remove adjusting screw (3) from adjusting sleeve (1).
(3) Remove seal (4) from adjusting screw (3).
(4) Perform steps (1) through (3) on second adjusting
plunger assembly.
11-18
