TM 9-2320-365-20-3
11-4. FRONT BRAKE PLUNGER ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Front brake shoes removed (para 11-2).
Front brake air chamber removed (para 11-7).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Trestle, Motor Vehicle Maintenance (Item 45, Appendix
C)
Gloves, Rubber (Item 13, Appendix C)
Brake Plunger Seal Driver (Item E-3, Appendix E)
Materials/Parts
Solvent, Dry Cleaning (Item 71, Appendix D)
Grease, Automotive and Artillery (GAA) (Item 23,
Appendix D)
Rag, Wiping (Item 51, Appendix D)
Lockwasher (4) (Item 108, Appendix G)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to
personnel.
a. Removal.
(1) Remove wedge assembly (1) from plunger housing (2).
11-17
