TM 9-2320-365-20-3
11-22. REAR GLADHAND REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Vise, Machinist (Item 46, Appendix C)
Socket Set, Impact (Item 33, Appendix C)
Materials/Parts
Filter Element (Item 13, Appendix G)
Damping Fluid (Item 20, Appendix D)
Packing, Preformed (Item 171, Appendix G)
Antiseize Compound (Item 63, Appendix D)
Lockwasher (Item 61, Appendix G)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to
personnel.
a. Removal.
NOTE
Both rear gladhands are removed the
same way.
EMERGENCY gladhand
shown.
(1) Remove dummy coupling (1) from gladhand (2).
(2) Disconnect air hose (3) from reducer fitting (4).
NOTE
Steps (3) and (4) require the aid of an
assistant.
(3) Remove reducer fitting (4) from adapter fitting (5).
(4) Remove nut (6), lockwasher (7), gladhand (2), and
identification plate (8), from rear crossmember (9).
Discard lockwasher.
Change 1
11-119
