TM 9-2320-365-20-3
11-25. STOPLIGHT SWITCH REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Air tanks drained (TM 9-2320-365-10).
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Antiseize Compound (Item 63, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Lockwasher (2) (Item 90, Appendix G)
a. Removal.
NOTE
Both stoplight switches are removed the same
way. Rear stoplight switch shown.
Tag wires and connection points prior to
removal.
Terminal lugs on front stoplight switch are
TL154 and TL155.
(1) Remove two nuts (1), lockwashers (2), and terminal
lugs TL152 (3) and TL153 (4) from stoplight switch (5).
Discard lockwashers.
(2) Remove stoplight switch (5) from fitting (6).
Change 1
11-129