TM 9-2320-365-20-3
NOTE
Note orientation of fittings prior to
removal.
(4) Remove 45-degree fitting (4) from front brake
two-way check valve (6).
(5) Remove two 90-degree fittings (2) from front
brake two-way check valve (6).
b. Installation.
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to
skin and clothing. Keep away from
open fire and use in a well-ventilated
area. If adhesive, solvent, or sealing
compound gets on skin or clothing,
wash immediately with soap and water.
Failure to comply may result in injury
to personnel.
(1)
Apply antiseize compound to threads of two 90-degree
fittings (1) and 45-degree fitting (2).
(2) Install two 90-degree fittings (1) in front brake
two-way check valve (3).
(3) Install 45-degree fitting (2) in front brake two-
way check valve (3).
11-127
