TM 9-2320-365-20-3
11-28. LOW PRESSURE TRANSMITTER TWO-WAY CHECK VALVE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Antiseize Compound (Item 63, Appendix D)
Adhesive (Item 8, Appendix D)
Lockwasher (2) (Item 90, Appendix G)
Adhesive (Item 9, Appendix D)
a. Removal.
NOTE
Perform step (1) on vehicle serial number
7448 and higher and vehicle serial
numbers 0001 through 7447 that have
previously had front lights cable assembly
replaced.
(1) Remove adhesives and boot (1) from low pressure
transmitter (1.1).
NOTE
Tag wires, air hoses, and connection
points prior to removal.
(1.1) Remove adhesive, two nuts (2), lockwashers (3), and
terminal lugs TL201 (4) and TL202 (5) from low
pressure transmitter (1.1). Discard lockwashers.
Change 1
11-139
