TM 9-2320-365-20-3
11-29. AIR COMPRESSOR GOVERNOR REPLACEMENT/REPAIR/ADJUSTMENT
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Adjustment
g. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
STE/ICE-R (Item 39, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Socket Set, Socket Wrench (Item 35, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Antiseize Compound (Item 63, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Repair Kit, Governor (Item 213.1, Appendix G)
References
TM 9-4910-571-12&P
Personnel Required
(2)
a. Removal.
NOTE
Tag air hoses and connection points prior
to disconnecting.
(1) Disconnect two air compressor governor hoses (1) from
fittings (2).
(2) Remove two fittings (2) from air compressor governor
(3).
11-144
Change 1
