TM 9-2320-365-20-3
(2) Position power steering pump reservoir (5) in bracket (1).
(3) Tighten screw (6) on clamp (7).
(4) Loosen screw (8) in clamp (9) as far as possible without
disengaging screw (8) from D-nut (10).
(5) Unhook clamp tabs (11) from tab windows (12).
CAUTION
Clamp tongue must be started in clamp
groove.
Failure to comply may result in
damage to equipment.
(6) Position clamp (9) on suction hose (13).
(7) Connect suction hose (13) on power steering pump
reservoir (5).
(8) Engage as many clamp tabs (11) as possible in tab
windows (12) allowing little or no play between clamp (9)
and suction hose (13).
(9) Tighten clamp (9) to 12-18 lb-in. (1-2 N·m).
Change 1
13-29