TM 9-2320-365-20-3
NOTE
Minimum allowable gap on clamp is 0.2 in. (5
mm). If gap is less than 0.2 in. (5 mm),
remove and re-install clamp.
(17) Measure gap on clamp (15).
c. Follow-On Maintenance.
(1) Install auxiliary starter solenoid (para 7-6).
(2) Fill power steering pump reservoir (Appendix H).
(3) Lower cab (TM 9-2320-365-10).
(4) Start engine (TM 9-2320-365-10).
(5) Check power steering system for smooth operation of
steering wheel and wheels.
(6) Shut down engine (TM 9-2320-365-10).
(7) Raise cab (TM 9-2320-365-10).
(8) Check fluid level in power steering pump reservoir (TM
9-2320-365-10).
(9) Lower cab (TM 9-2320-365-10).
End of Task.
Change 1
13-31
