TM 9-2320-365-20-4
16-10. FENDER AND SPLASH GUARD REPLACEMENT (CONT)
WARNING
Wear appropriate eye protection when
removing rivets. Failure to comply may result
in injury to personnel.
(3) Remove three rivets (5), washers (6), and engine splash
guard (7) from cab (4).
d. Engine Splash Guard Installation (All Models
Except M1081).
NOTE
Left and right engine splash guards are
installed the same way. Left side shown.
(1) Install engine splash guard (1) on cab (2) with three
washers (3) and rivets (4).
NOTE
Step (2) requires the aid of an assistant.
(2) Install engine splash guard (5) on cab (2) with 14
washers (6) and rivets (7).
(3) Lower cab (TM 9-2320-365-10).
16-86
