TM 9-2320-365-20-4
e. Rear Splash Guard Removal.
NOTE
Left and right rear splash guards are
removed the same way. Right side shown.
Remove three nuts (1), washers (2), spacers (3), screws
(4), and rear splash guard (5) from bumper (6).
f. Rear Splash Guard Installation.
NOTE
Left and right rear splash guards are installed
the same way. Right side shown.
(1) Position rear splash guard (1) on bumper (2) with three
screws (3), spacers (4), washers (5), and nuts (6).
(2) Tighten three nuts (6) to 18-22 lb-ft (24-30 N·m).
g. Rear Fender Removal.
NOTE
Left and right rear fenders are removed the
same way. Right side shown.
(1) Remove two nuts (1), four washers (2), two screws (3),
and rear fender (4) from bracket (5).
16-87
