TM 9-2320-365-20-4
16-41. M1079 WINDOW COVER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Drill Set, Twist (Item 6, Appendix C)
Tools and Specials Tools (Cont)
Goggles, Industrial (Item 15, Appendix C)
Tool Kit, Blind Rivet (Item 43, Appendix C)
Materials/Parts
Sealing Compound (Item 67, Appendix D)
Rivet, Blind (6) (Item 226, Appendix G)
a. Removal.
NOTE
All window covers are removed the same
way. Left front window cover shown.
(1) Remove sealing compound from top edge of window
cover (1) and edges of retainer (2).
(2) Position window cover (1) to allow access to retainer (2).
WARNING
Wear appropriate eye protection when
removing rivets. Failure to comply may
result in injury to personnel.
(3) Remove six rivets (3), retainer (2), and window cover (1)
from window main frame (4).
(4) Remove sealing compound from top edge of window
main frame (4).
16-249
