TM 9-2320-365-20-4
16-43. M1079 VAN BODY FLOOR TAPPING PLATE INITIAL INSTALLATION (SERIAL
NUMBERS 001 THROUGH 190) (CONT)
(3) Measure and mark a line (7) on van body floor (2) from
van body left side wall (5) to van body right side wall (8)
1 in. (2.54 cm) from van body front wall (3).
NOTE
Step (4) requires the aid of an assistant.
(4) Position tapping plates (9 and 10) on van body floor (2)
with left edges of tapping plates aligned with line (1) and
front edge of tapping plate (9) aligned with line (7).
(5) Mark locations for drilling pilot holes.
NOTE
Step (6) requires the aid of an assistant.
(6) Position tapping plates (11 and 12) on van body floor (2)
with left edges of tapping plates aligned with line (6) and
front edge of tapping plate (11) aligned with line (7).
(7) Mark locations for drilling pilot holes.
16-254
