TM 9-2320-365-20-4
16-5. DOOR REPAIR/ADJUSTMENT (ALL MODELS EXCEPT M1081)
This task covers:
a. Window and Window Regulator Removal
b. Window and Window Regulator Installation
c. Door Latch/Lock Disassembly
d. Door Latch/Lock Assembly
e. Door Removal
f. Door Installation
g. Door Adjustment
h. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Marker light removed (para 7-31).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C)
Screwdriver Attachment, Socket Wrench (Item 49,
Appendix B)
Socket Set, Socket Wrench (Item 35, Appendix C)
Tool Kit, Blind Rivet (Item 43, Appendix C)
Drill, Portable, Electric (Item 7, Appendix C)
Drill, Twist (Item 8, Appendix C)
Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B)
Materials/Parts
Soap, Laundry (Item 68, Appendix D)
Sealing Compound (Item 61, Appendix D)
Rivet, Compression (10) (Item 237, Appendix
G)
Grease, Automotive and Artillery (GAA) (Item
23, Appendix D)
Seal, Nonmetallic (Item 253, Appendix G)
Rivet, Blind (6) (Item 217.1, Appendix G)
Personnel Required
(2)
NOTE
If complete repair of the door is required, it
will be necessary to notify DS maintenance to
replace
the
door
side
window
at
the
completion of Unit level repairs.
a. Window and Window Regulator Removal.
NOTE
Left and right windows and window reg-ulators
are removed the same way. Right side shown.
(1) Remove cover (1) from door handle (2).
(2) Remove screw (3), door handle (2), and washer (4) from
door (5).
(3) Remove four screws (6) and door handle (7) from door
(5).
16-16
Change 1
