TM 9-2320-365-20-4
NOTE
Steps (8) through (11) require the aid of an
assistant.
(8) Position roof hatch (8) on cab roof (2) with matchmarks
aligned.
(8.1) Position 12 washers (8.3) and screws (9) in roof hatch
(8).
(8.2) Tighten 12 screws (9) to 35-41 lb-ft (48-56 N·m).
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and ar harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(8.3) Apply 0.625 in. (15.0 mm) bead of sealant to 12 screws
(9) and between roof hatch (8) and cab roof (2).
Change 1
16-12.1/(16-12.2 Blank)