TM 9-2320-365-20-4
16-4. M1081 CAB ROOF REPLACEMENT (CONT)
b. Installation.
(1) Install cab clearance lights upper cable assembly (1) in
cab roof (2).
(2) Position five centering cones (3) on cab roof (2) with five
screws (4)
(3) Position 11 centering cups (5) on cab roof (2) with 11
screws (6).
(4) Tighten five screws (4) and 11 screws (6) to 62-124 lb-
in. (7-14 N·m).
CAUTION
Begin inside and outside rubber strip
installation on opposite sides of each other.
Failure to comply may result in damage to
equipment.
(5) Install inside rubber strip (7) on roof hatch (8).
(6) Install outside rubber strip (8.1) on roof hatch (8).
(7) Install 6 in. (152.0 mm) back-up rubber strips (8.2)
centered on joints of inside and outside rubber strips (7
and 8.1).
16-12
Change 1
