TM 9-2320-365-20-4
NOTE
Steps (12) through (14) require the aid of an
assistant.
(12) Remove four nuts (30), lockwashers (31), and washers
(32) from three screws (28) and screw (29). Discard
lockwashers.
(13) Remove three screws (28) from 110/208 vac POWER
OUT connector (27).
(14) Remove screw (29), dust cap (26), 110/208 vac POWER
OUT connector (27) and gasket (33) from 110/208 vac
power entry panel (5).
d. 110/208 VAC POWER OUT Connector Installation.
NOTE
Steps (1) through (4) require the aid of an
assistant.
(1) Install gasket (1) and 110/208 vac POWER OUT
connector (2) on 110/208 vac power entry panel (3) with
dust cap (4) and screw (5).
(2) Install three screws (6) in 110/208 vac POWER OUT
connector (2).
16-459