TM 9-2320-365-20-4
16-69. M1079 CHASSIS GROUND LUG REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
AC power disconnected (TM 9-2320-365-10).
Batteries disconnected (para 7-48).
Ground wire removed, if installed (TM 9-2320-
365-10).
LH and RH doors opened (115 degrees) (TM 9-
2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
Lockwasher (16) (van bodies serial number 191 and
higher) (Item 77, Appendix G)
Lockwasher (28) (van body serial numbers 001
through 190) (Item 77, Appendix G)
Lockwasher (4) (Item 81, Appendix G)
Personnel Required
(2)
a. Removal.
NOTE
Perform step (1) on van body serial numbers
001 through 190.
(1) Remove 28 screws (1), lockwashers (2), washers (3),
and cover (4) from 110/208 vac power entry panel (5).
Discard lockwashers.
NOTE
Perform step (2) on van bodies serial number
191 and higher.
(2) Remove 16 screws (1), lockwashers (2), washers (3),
and cover (4) from 110/208 vac power entry panel (5).
Discard lockwashers.
16-464
