TM 9-2320-365-20-4
19-4. HYDRAULIC MANIFOLD REPLACEMENT/REPAIR (CONT)
(2) Install six preformed packings (4) on valves (5 and 6)
and air valves (7 and 8).
NOTE
Lubricate parts with oil as required.
(3) Install valves (5 and 6) and air valves (7 and 8) in
hydraulic manifold (2).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(4) Apply sealing compound to threads of three plugs (9).
(5) Position preformed packing (10), check valve (11),
setscrew (12), and plug (9) in CV4 orifice (13).
(6) Position two check valves (11), preformed packings (10),
spacers (14), setscrews (12), and plugs (9) in CV2 orifice
(15) and CV3 orifice (16).
(7) Tighten three plugs (9) to 21 lb-ft (28 N·m).
19-20.10
Change 1
