TM 9-2320-365-20-4
(8) Install four preformed packings (17) on manifold valves
(18).
(9) Install four preformed packings (19, 20, and 21) and
eight back-up rings (22, 23, and 24) on four manifold
valves (18).
(10) Install two orifice plugs (25) in hydraulic manifold (2).
(11) Install two orifice filters (26) in hydraulic manifold (2).
NOTE
Position retainer rings and manifold valves as
noted during disassembly.
(12) Position four manifold valves (18) in hydraulic manifold
(2).
(13) Tighten four manifold valves (18) to 40 lb-ft (54 N·m).
(14) Position four dust boots (27), retainer rings (28), spacers
(29), springs (30), knobs (31), and name plates (32) on
manifold valves (18) with nuts (33).
(15) Tighten four nuts (33) to 40 lb-in. (5 N·m).
Change 1
19-20.11
