TM 9-2320-365-20-4
19-5. HYDRAULIC MANIFOLD FILTER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Gloves, Rubber (Item 13, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Filter Assembly (2) (Item 12, Appendix G)
Hydraulic Fluid A (Item 26, Appendix D)
a. Removal.
WARNING
Hydraulic fluid (MIL-L-5606) is TOXIC.
Wear protective goggles and gloves; use
only in well ventilated area; avoid contact
with skin, eyes, and clothes. Skin and
clothing that come in contact with
hydraulic
oil
should
be
washed
immediately. Saturated clothing should
be removed immediately.
Failure to
comply may result in injury to personnel.
(1) Remove two plugs (1) from hydraulic manifold (2).
(2) Remove two preformed packings (3) from plugs (1).
Discard preformed packings and plugs.
(3) Remove two retainers (4), filters (5), and springs (6) from
hydraulic manifold (2). Discard retainers, filters, and
springs.
19-22
