TM 9-2320-365-20-5
(10) Install two twist locks (10) on bracket (11).
(11) Connect connector P4 (8) to connector J4A (12).
(12) Position heater control unit (6) on bracket (11).
(13) Latch two screws (7) on heater control unit (6).
(14) Close door (5) on heater control unit (6).
(15) Latch screw (4) on door (5).
Heater weighs approximately 120 lbs (54
kgs). Use the aid of an assistant when
lifting. Failure to comply may result in
injury to personnel.
NOTE
Step (16) requires the aid of an assistant.
(16) Install heater (2) on pod panel (13).
20-279
WARNING
