TM 9-2320-365-20-5
(32) Remove nut (49), lockwasher (50), and washer (51) from
alternator terminal (52).
(33) Position terminal lug TL60 (43) on alternator terminal
(52) with washer (51), lockwasher (50), and nut (49).
(34) Tighten nut (49) to 156-180 lb-in. (17-21 N·m).
(35) Position dust boot (44) on terminal lug TL60 (43).
(36) Remove nut (53), lockwasher (54), insulation washer
(55), and fuse link (56) from alternator terminal (57).
(37) Position fuse link (56), terminal lug TL2 (42) and TL6
(48), insulation washer (55), lockwasher (54), and nut
(53) on alternator terminal (57).
(38) Tighten nut (53) to 156-180 lb-in. (17-21 N·m).
(39) Position dust boot (45) on terminal lugs TL2 (42) and
TL6 (48).
20-54. 200 AMP ALTERNATOR KIT INSTALLATION (CONT)
(40) Position three clamps (10) on 12vdc cable (40) and
24vdc cable (41).
(41) Position three clamps (10) on air inlet manifold (13) three
with washers (9) and screws (8).
(42) Tighten three screws (8) to 22-27 lb-ft (31-37 N·m).
20-318
Change 1
