TM 9-2320-365-20-5
23-7. WET TANK REPLACEMENT (CONT)
NOTE
Perform step (11) on vehicles not previously
equipped with corrosive enhanced clamps.
(11) Position two clamps (7) on battery box (8).
(12) Position wet tank (2) in two clamps (7) with self-locking
nuts (9).
(13) Tighten two self-locking nuts (9) to 4-5 lb-ft (5-7 N·m).
(14) Connect connector P84 (10) to pressure switch (6).
(15) Connect three air hoses (11) to wet tank (2).
c. Follow-on Maintenance.
(1) Install pressure protection valve (para 11-29).
(2) Start engine (TM 9-2320-365-10).
(3) Check air hoses and wet tank fittings for air leaks.
(4) Shut down engine (TM 9-2320-365-10).
End of Task.
23-34
Change 1
