CONTINUITY TEST
Change 1 2-256.15
TM 9-2320-365-20-1
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
starting motor ground terminal stud.
(3) Connect negative (-) probe of multimeter to
terminal lug TL45 and note reading on
multimeter.
(4) If continuity is not present, replace starter to
shunt 24 VDC cable (para 7-84).
(5) Lower cab (TM 9-2320-365-10).
(6) Install terminal lug TL45 on shunt with
lockwasher and screw.