10-2. WHEEL BEARING/CENTRAL TIRE INFLATION SYSTEM (CTIS) SEAL
(22) Install wheel end shim(s) (17) on wheel bearing nut (14).
Measurement from surface of shims to face
of wheel end hub must be 2.168-2.173 in.
(5.51-5.52 cm). Failure to comply may result
in damage to equipment.
(23) Measure distance from surface of shim(s) (17) to face of
wheel end hub (2).
(24) Add or remove shim(s) (17) as required to obtain
measurement of 2.1678-2.173 in. (5.51-5.52 cm).
Wheel drum weighs approximately 90 lbs (41
kgs). Use the aid of an assistant to install
wheel drum. Failure to comply may result in
injury to personnel.
(25) Install wheel drum (18) on wheel end hub (2).