13-4. TIE-ROD REPLACEMENT/REPAIR
This task covers:
e. Follow-On Maintenance
Engine shut down (TM 9-2320-365-10).
Cab raised (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C)
Tools and Special Tools (Cont)
Socket, Socket Wrench (Item 37, Appendix C)
Wrench Set, Socket (Item 48, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Pin, Cotter (2) (Item 200, Appendix G)
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
comply may result in injury to personnel.
Left and right tie rod ends are removed the
same way. Left side shown.
(1) Remove cotter pin (1) and slotted nut (2) from each end
of tie rod (3). Discard cotter pins.
(2) Remove tie rod (3) from two steering knuckle arms (4).