2. Is 76-99 ohms resistance present from relay K2 terminal 86 to terminal 85?            TEST OPTIONS            Resistance Test or STE/ICE-R Test #91     REASON FOR QUESTION     If 76-99 ohms resistance is not present, relay K2 is faulty.             KNOWN INFO              Circuit breaker CB70 OK. Master power switch OK.        POSSIBLE PROBLEMS        Faulty relay K2. Faulty dashboard cable assembly. Replace relay K2 (para 7-9). YES NO 3.            TEST OPTIONS            Continuity Test or STE/ICE-R Test #91     REASON FOR QUESTION     If continuity is not present, wire 3041 is faulty. Is continuity present from relay K2 socket 85 to a known good ground?             KNOWN INFO              Circuit breaker CB70 OK. Master power switch OK. Relay K2 OK.        POSSIBLE PROBLEMS        Faulty dashboard cable assembly. YES NO e16A. MASTER POWER SWITCH DOES NOT OPERATE (CONT) Repair wire 3041 from relay K2 socket 85 to terminal board TB2 position 43 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). TM 9-2320-365-20-1 2-370.6          Change 1