KNOWN INFO              NO            TEST OPTIONS                REASON FOR QUESTION     Continuity Test or STE/ICE-R Test #91 WARNING Read WARNING on following page.             KNOWN INFO                         TEST OPTIONS            Voltage Test or STE/ICE-R Test #89     REASON FOR QUESTION     YES NO 5. 6. Repair wire 1416 from PDP relay K7 terminal 30 to circuit breaker CB78 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). Repair wire 3002 from PDP relay K7 terminal 85 to terminal board TB2 position 74 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). YES e40. ONE OR BOTH HEADLIGHTS (HIGH AND LOW BEAM) DO NOT ILLUMINATE (CONT)        POSSIBLE PROBLEMS        Front lights cable assembly OK. Main light switch OK. Faulty dashboard cable assembly. Faulty relay K8. Faulty relay K7. Is continuity present from relay K7 terminal 85 to a known good ground? If continuity is not present, wire 3002 is faulty. If 12 VDC is not present, wire 1416 is faulty. Is 12 VDC present at relay K7 terminal 30? Front lights cable assembly OK. Main light switch OK.        POSSIBLE PROBLEMS        Faulty dashboard cable assembly. Faulty relay K8. Faulty relay K7. TM 9-2320-365-20-1 2-516          Change 1