TM 9-2320-365-20-2
2-2091
CONTINUITY TEST
CONTINUITY TEST
(1) Remove eight screws, cover, and retainer from
NATO plug.
(2) Set multimeter to ohms.
(3) Connect positive (+) probe of multimeter to
NATO plug pin.
(4) Connect negative (-) probe of multimeter to
NATO plug positive (+) terminal lug and
note reading on multimeter.
(5) If continuity is not present, replace NATO
plug (para 20-63).
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
NATO plug outer wall.
(3) Connect negative (-) probe of multimeter to
NATO plug negative (-) terminal lug and
note reading on multimeter.
(4) If continuity is not present, replace NATO
plug (para 20-63).
