TM 9-2320-365-20-3
b. Disassembly.
NOTE
Tag wires and connection points prior to
removal.
(1) Remove nut (1), lockwasher (2), washer (3), and wire
1603 (4) from terminal board TB2 (5).
Discard
lockwasher.
(2) Remove 46 quick disconnect terminals (6) from terminal
board TB2 (5) positions 3, 8, 9, 10, 11, 13, 14, 15, 16,
17, 18, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
33, 34, 35, 36, 37, 39, 40, 43, 44, 45, 46, 47, 50, 53, 55,
56, 60, 62, 70, 74, 77, and 79.
(3) Remove two nuts (7), lockwashers (8), screws (9), and
terminal board TB2 (5) from PDP frame (10). Discard
lockwashers.
(4) Remove screw (11), lockwasher (12), and wire 1603 (4)
from PDP frame (10). Discard lockwasher.
(5) Remove two nuts (13), lockwashers (14), washers (15),
cover (16), and two washers (15) from terminal board
TB1 (17). Discard lockwashers.
(6) Remove 38 quick disconnect terminals (18) from terminal
board TB1 (17) positions 5, 11, 20, 23, 24, 26, 27, 28,
29, 30, 31, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 46,
47, 50, 51, 52, 53, 54, 56, 57, 58, 59, 60, 61, 62, 63,
and 64.
7-69
