TM 9-2320-365-20-3
7-11. WTEC III DASHBOARD CABLE ASSEMBLY REPLACEMENT/REPAIR (CONT)
(15) Push in two locking tabs (23) and install connector PX21
(24) through front of PDP frame (5).
(16) Install six quick disconnect terminals (25) in connector
PX21 (24).
(17) Install terminal board TB1 (26) on PDP frame (5) with
two screws (27), spacers (28), spacers (29), washers
(30), lockwashers (31), and nuts (32).
(18) Install 38 quick disconnect terminals (33) on terminal
board TB1 (26) positions 5, 11, 20, 23, 24, 26, 27, 28,
29, 30, 31, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 46,
47, 50, 51, 52, 53, 54, 56, 57, 58, 59, 60, 61, 62, 63,
and 64.
(19) Position two washers (34) and cover (35) on terminal
board TB1 (26) with two washers (34), lockwashers (36),
and nuts (37).
(20) Position wire 1603 (38) on PDP frame (5) with
lockwasher (39), and screw (40).
7-74
