TM 9-2320-365-20-3
7-11. WTEC III DASHBOARD CABLE ASSEMBLY REPLACEMENT/REPAIR (CONT)
(7) Remove two nuts (19), lockwashers (20), washers (21),
spacers (22), terminal board TB1 (17), two spacers (23),
and screws (24) from PDP frame (10).
Discard
lockwashers.
(8) Remove six quick disconnect terminals (25) from
connector PX21 (26).
(9) Push in two locking tabs (27) and remove connector
PX21 (26) from front of PDP frame (10).
NOTE
Tag terminal lugs and connection points prior
to removal.
(10) Remove screw (28), lockwasher (29), and four terminal
lugs (30) from PDP (31). Discard lockwasher.
(11) Remove screw (32), lockwasher (33), and four terminal
lugs (34) from PDP (31). Discard lockwasher.
7-70