TM 9-2320-365-20-3
7-11. WTEC III DASHBOARD CABLE ASSEMBLY REPLACEMENT/REPAIR (CONT)
NOTE
Tag diodes, relays, and circuit breakers prior
to removal.
(20) Remove three diodes (46) from PDP (31).
(21) Remove 24 relays (47) from PDP (31).
(22) Remove 29 circuit breakers (48) from PDP (31).
c. Assembly.
(1) Install 29 circuit breakers (1) on PDP (2).
(2) Install 24 relays (3) on PDP (2).
(3) Install three diodes (4) on PDP (2).
(4) Position PDP (2) on PDP frame (5) with six washers (6),
screws (7), lockwashers (8), and nuts (9).
(5) Tighten six nuts (9) to 46-57 lb-ft (63-77 N·m).
7-72
