TM 9-2320-365-20-3
8-15. TRANSMISSION OIL COOLER HOSES REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Wrench, Torque 0-200 lb-in. (Item 58, Appendix C)
Tool Kit, Genl Mech (Item 44, Appendix C)
Crowfoot Attachment, Socket Wrench (Item 12.1,
Appendix B)
Socket Set, Socket Wrench (Item 34, Appendix C)
Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Cap and Plug Set (Item 15, Appendix D)
Tie, Cable, Plastic (Item 69, Appendix D)
Nut, Self-locking (4) (Item 134, Appendix G)
Nut, Self-locking (4) (Item 145, Appendix G)
Antiseize Compound (Item 63, Appendix D)
Packing, Preformed (2) (Item 158, Appendix G)
Packing, Preformed (2) (Item 158.1, Appendix G)
Personnel Required
(2)
WARNING
• Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
• Ensure exhaust system is cool before
preforming maintenance. Failure to comply
may result in injury to personnel.
a. Removal.
CAUTION
Cap or plug hoses when disconnecting to
prevent contamination of transmission oil.
Failure to comply may result in damage to
equipment.
NOTE
• Tag hoses and connection points prior to
disconnecting.
• Step (1) requires the aid of an assistant.
(1) Remove four self-locking nuts (1), bolts (2), and lower
front support crossmember (3) from vehicle. Discard
self-locking nuts.
Change 1
8-61
