TM 9-2320-365-20-3
(16) Position 90-degree fitting (22) in transmission (13).
(17) Tighten jam nut (23) on 90-degree fitting (22).
(18) Position transmission oil cooler hose (19) on 90-degree
fitting (22).
(19) Position 90-degree fitting (24) on transmission (13).
(20) Tighten jam nut (25) on 90-degree fitting (24).
(21) Position transmission oil cooler hose (17) on 90-degree
fitting (24).
(22) Tighten transmission oil cooler hoses (17 and 19) to 94-
104 lb-ft (127-141 N·m).
(23) Position four clamps (26) on transmission oil cooler
hoses (17 and 19).
NOTE
Step (24) requires the aid of an assistant.
(24) Position four clamps (26) on transmission oil cooler hose
bracket (27) with four screws (28) and self-locking nuts
(29).
(25) Install gasket (9), flywheel cover (8), and transmission oil
cooler hose bracket (27) on flywheel housing (10) with
four washers (7) and screws (28).
(26) Tighten four self-locking nuts (29) to 96-132 lb-in. (11-13
N·m).
(27) Tighten four screws (28) to 16-25 lb-ft (21-35 N·m).
Change 1
8-59
