TM 9-2320-365-20-3
8-15. TRANSMISSION OIL COOLER HOSES REPLACEMENT (CONT)
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Install preformed packing (1) on fitting (2).
(2) Position transmission oil cooler hose (3) on fitting (2).
(3) Tighten transmission oil cooler hose (3) to 94-104 lb-ft
(127-141 N·m).
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep
away from open fire and use in a well-
ventilated area.
If adhesive, solvent, or
sealing compound gets on skin or clothing,
wash immediately with soap and water.
Failure to comply may result in injury to
personnel.
(4) Apply antiseize compound to threads of 45-degree fitting
(4).
(5) Install 45-degree fitting (4) in transmission oil cooler hose
(3).
(6) Connect transmission oil sampling hose (5) to 45-degree
fitting (4).
(7) Install preformed packing (6) on fitting (7).
(8) Position transmission oil cooler hose (8) on fitting (7).
(9) Tighten transmission oil cooler hose (8) to 94-104 lb-ft
(127-141 N·m).
8-64
Change 1
